Solenoid Water
Solenoid Water
The basic concept of solenoid valveSolenoid valve is used to control the direction of fluid based automation components, belonging to the actuator; often used for machine control and industrial valves above, to control the direction of the medium, so as to achieve the control switch on the valve.
Solenoid valve in a closed chamber, in different locations with holes, each hole leads to a different pipeline, valve chamber in the middle, both sides are two electromagnets, which face the magnet coils body will be attracted to which side, solenoid valves by controlling the body’s movement to a different file live or leaked oil discharge hole, and into the hole is always open, hydraulic oil flows to different hoses, then the pressure to push through the oil tank piston, piston rod has driven, piston rod drive mechanism moving. This electrical flow by controlling the electromagnet to control the mechanical movement off.
New multi-function solenoid valves: Install the pipe, both manual functions, eliminating the need for three manual valves, online maintenance, significantly reducing costs. Medium viscosity adjustable scope: regulation allows gas, water, oil general, convenient purchasing, storage, installation and maintenance. Valves open and close time is adjustable: meet a variety of different requirements, to effectively prevent water hammer damage. Valve opening can be adjusted: the maximum and minimum opening can be preset to improve control accuracy. The main valve can compensate for wear and tear:: extend valve life, stand the test of time.
The structure of electromagnetic valve principle: electromagnetic valve skillfully pilot solenoid valve, manual valve and throttle combination in one of the pilot valve to accept signals switch the main valve is driven. Adjusting screws A, B medium viscosity can be adjusted the scope and main valve switching time, and can be compensated after the main valve wear. Pilot valve needs maintenance, just tighten the adjusting screw bolt B and isolation of C, can be removed, and can be used to manually screw operation. The screw can also be used to control solenoid valve when the preset maximum or minimum flow.
What are the main solenoid valves features it, the following were introduced.
Leakage blocking must, within the leak easy to control, use of safety. Internal and external leaks are endangering the safety factor. Other controlled valve stem out usually by electrical, pneumatic, hydraulic actuator control valve of the rotation or move. This should solve the long-term action outside the dynamic seal valve stem leakage problems; only solenoid valve is sealed with a magnetic force on the septum in the electric magnetic valve core inside the casing to complete, there is